Press

 :

Ultrasonic Testing Courses (UT)

High frequency sound pulses are emitted from a transducer above a sample. The sound waves propagate through the sample, and reflect at interfaces. The reflected waves are monitored using a detector above the sample. The thickness of the sample, and the depth and type of flaw can be ascertained using this method. The method can be applied to most materials if sound transmission is good. Quick high sensitive results are obtained.

We can provide Ultrasonic Testing training suitable for DIN EN ISO 9712 Levels 1, 2, and 3, and ASNT Level 3. Alternatively we can provide training suitable for candidates working to an employer written practice based on SNT-TC-1A. Ultrasonic Testing is separated into three specific product sectors for certification purposes, Welds, Wrought Products (Forgings), and Castings.

Level 1:

General Theory:
  •   Principles of Ultrasonic Testing
  •   Equipment
  •   Testing Techniques
  •   Calibration of Testing Systems
Specific Theory:
  •   Detectability of Defects
  •   Factors Affecting the Performance of the Ultrasonic Test
  •   Codes of Practice and Standards
  •   Conducting and Recording the Test

Level 2:

General Theory:
  •   Review of Level 1
  •   Principles of Ultrasonic Testing
  •   Equipment
  •   Testing Techniques
  •   Calibration of Testing Systems
Specific Theory:
  •   Detectability of Defects
  •   Factors Affecting the Performance of the Ultrasonic Test
  •   Codes of Practice and Standards
  •   Conducting and Recording the Test
  •   Interpretation of Test Results
  •   Product Technology Theory

Minimum Training and Work Experience Requirements

Level 1

40 Hours Training
3 Months Work Experience

Level 2

80 Additional Hours Training
9 Additional Months Work Experience

The minimum requirements for Level 2 are additional to requirements already satisfied for Level 1. If you are wishing to go direct to level 2, the minimum work experience is 12 months, and the minimum training is 120 hours. Note: The examination may be taken before the work experience is completed; however certificates are not issued until proof of work experience is provided. After passing the examination, a results notice is issued by SECTOR Cert, you then have 24 months to complete the required work experience.

If you require training to comply with your employer's written practice, CQI will change the course to suit your company's procedure. For information about training for an employer based certification, please contact CQI office .